How to Get Rid of Iron Spots? Update 07/2022

Maybe you got a great antique leather jacket at a thrift store, but you don’t like the glued-on motorbike patches. Maybe you’ve outgrown some of your old favorite bands and want to get rid of the embroidered patches on your beloved shirt. You can learn how to remove iron-on patches without ruining your clothes in either case!

The best technique to remove iron-on patches is to remelt the glue with a cautious application of heat, such as an iron or a hairdryer. Freezing the patch to make the glue brittle is another popular way. Finally, adhesive removers can break down the glue that holds the patch in place.

This article will teach you how to remove iron-on patches in seven simple steps. You’ll also discover instructions on how to use iron-on vinyl. Finally, you’ll learn how to take care of patches on unique clothes, such as a leather jacket.

How to Remove Iron on Patches

Do Iron-On Patches Come Off?

If the adhesive holding the patch gets too hot, or if an adhesive remover dissolves the previous glue, iron-on patches can peel off the fabric. Patches can actually peel off on their own if the garment becomes too heated. For example, putting a patched jacket in the dryer could cause the emblems to peel away at the edges or even fall off!

Embroidered patches, on the other hand, now come with a fairly strong heat-activated adhesive backing. To keep your patch in place, most patches use a type of double-sided fusible web with a lot of sticky threads.

When a badge is properly applied by heating the badge’s surface and then eating the cloth on the reverse side, the badge will stay in place for a long time.

In some circumstances, you must use heat or chemicals to remove the patch on purpose.

Can You Remove Iron On Patches?

Reapplying heat or using special chemical solvents can be used to remove iron-on patches. In rare circumstances, excessive cold can be used to make the adhesive brittle enough to be easily removed.

You could want to remove iron-on patches for a variety of reasons, including conserving old patches as souvenirs or upcycling a thrift store find. But before you start tearing the patches, there are a few things to consider.

First and foremost, what fabric is the clothing, bag, or other object made of? Denim, leather, and thick polyester are relatively easy to remove patches from, but more delicate materials may break apart or rip during the removal procedure.

You should also think about how the object will seem without the patch. The patch is likely to have been on that fabric for a long time, which means the fabric behind the patch will be far less faded than the rest of the garment! This implies that if you remove a star-shaped patch from a denim jacket, you’ll be left with a dark blue star surrounded by faded denim!

Finally, the majority of the patch removal procedures presented here tend to leave a strong adhesive film on the garment. Special chemical solvents can be used to remove dried adhesive, but they may harm the cloth. To check that the adhesive remover is safe to use, test it on a hidden portion of the fabric item or garment.

How to Remove Iron on Patches: 7 Methods

Try one of these seven simple procedures to remove an iron-on patch with surprisingly little effort! The original adhesive holding the embroidered emblem in place can be released by heat, cold, or powerful chemicals.

Consider the appropriate safety precautions before you begin! If you’re using a hot iron, wear a glove or tweezers to avoid touching the badge with your bare hands. Make sure you don’t get storm chemicals on your skin if you use them.

1. With an Iron

Removing Iron on Patch

Using an iron to remove an iron-on badge is the most common way. This strategy usually provides the quickest results. The main risk is that you will melt or scorch certain types of fabric if you use a hot iron on them.

This may seem counterintuitive, given that you most likely used the iron to apply the badge in the first place! But, when you think about it, heat caused the glue to melt the first time, and it has the potential to do it again!

Find out what kind of fabric the patch is glued to before you start. Cotton materials, such as denim, can withstand high temperatures. Low heat settings are required for leather or polyester.

  1. To begin, prepare your ironing board and heat your iron to the greatest temperature your fabric will tolerate. However, you do not want to use the steam setting.
  2. After that, smooth a thin pressing cloth or a piece of wax paper over the badge. You can also use a handkerchief or a small kitchen towel.
  3. For fifteen seconds, press the iron down firmly on top of the pressing cloth.
  4. Remove the pressing cloth and set the iron aside. Gently tug at the badge’s edge with your fingers or a pair of disposable tweezers. Is it easy to pull off?
  5. Replace the pressing cloth and heat for another 15 seconds if the badge does not remove smoothly.
  6. Pull the badge away from the fabric with tweezers or your fingers once the patch glue has melted.
  7. On the fabric’s surface, you’ll most likely find a smear of old adhesive. This isn’t a problem! Later in this post, you’ll find instructions for deleting it.

2. Without an Iron – Nail Polish Remover

Cutex Ultra-Powerful Nail Polish Remover for Gel, Glitter, and Dark Colored Paints, Paraben Free, 6.76 Fl Oz

Using acetone-based nail polish remover is one of the cheapest ways to remove an iron-on patch. Acetone dissolves a wide range of adhesives, making it a fantastic and cost-effective option for this project!

A drop of nail polish remover should be spot-tested on a hidden interior seam and left to sit for fifteen minutes. Before you go any further, double-check that the fabric isn’t discolored.

  1. Dip a cotton ball in nail polish remover and dab it along the badge’s edge many times.
  2. As the badge loosens, use tweezers to smooth up the edge.
  3. Another cotton ball should be soaked and put under the badge.
  4. Continue peeling the badge off and wiping the folded edge with acetone.Set the badge aside and wipe the remaining glue residue away with a fresh cotton ball dipped in nail polish remover until it dissolves and comes away.

3. Warm Water Soak

How to take off an iron on patch

Although not every iron-on patch will dissolve in warm water, older patches that are already loose may benefit from a hot bath!

Please note that this procedure should not be used on leather. Before you undertake the soaking approach, be sure you can safely submerge the item or clothing in water.

  1. Fill a bucket halfway with warm water to begin.
  2. Lower the item in the water that has the patch on it. Set the piece containing the emblem in first on a bulky clothing like a jacket so that the rest of the garment can keep it down. To hold the emblem down beneath the water’s surface, you can use a clean glass jar or another waterproof weight.
  3. Allow at least three hours for the iron-on patch to soak, but keep an eye on the water level. Empty the water and replace it with new, warm water as soon as it reaches room temperature.
  4. Drain or pour out the water after three hours.
  5. Remove the badge from the fabric by gently peeling it away. If it doesn’t come away right away, you may need to gently tug it back and forth.

4. Freezer

Freezing your patch is another technique to drastically change the temperature and change the state of the adhesive that holds it in place. When the adhesive freezes, it becomes more brittle and susceptible to breakage.

Of course, the clothing or item with the patch must fit in your freezer for this method to work! It’s possible that a thick winter coat or a huge bag will not fit. If that’s the case, consider an alternative approach!

  1. In a plastic trash bag, place the garment or object. Set it in your freezer.
  2. You can either set a timer for two to three hours or leave it in there all night!
  3. Set up a flat work surface, such as a table or counter, before removing it from the freezer. Make sure you have a blunt spoon on hand. If you use a sharp object, such as a craft knife, you risk slicing the cloth beneath the badge.
  4. Remove the item from the freezer. Immediately begin working on the badge’s edge, attempting to push the blunt spoon underneath it. The brittle adhesive will shatter in most cases, and the badge should pop free!
  5. Once the badge is removed, you’ll need to apply an adhesive removal procedure to remove the residual glue flakes.

5. Hair Dryer

If you don’t have an iron, you can heat the adhesive behind an iron-on badge with a hairdryer and remove it!

This method can also be used if you have a large item that is difficult to iron, such as a backpack.

  1. If possible, put the garment or item flat with the logo facing down so you can see what’s below. If this isn’t possible, find a technique to get to the back of the badge, such as reaching inside a rucksack.
  2. Set your hairdryer to the hottest setting possible.
  3. Hold the dryer so that the hot air strikes the back of the patch, warming the fabric behind it.
  4. Keep it here for fifteen seconds before attempting to peel up the patch’s edge. If it reappears, carefully scrape it away! If it still doesn’t work, try using the hairdryer for another fifteen seconds.
  5. After you’ve removed the badge, you’ll probably need to use an adhesive remover to remove any lingering stickiness from the fabric’s surface.

6. White Vinegar


Consider using white vinegar for a chemical-free, no-heat technique! True, vinegar does not dissolve adhesives as well as acetone does. However, if you prefer a gentler approach and have some spare time, consider this strategy!

  1. Fill a bucket to one-third capacity with water. Swish the fluid around to mix in the equivalent amount of white vinegar.
  2. Add the item with the patch to the list. Make certain it is thoroughly submerged in the water.
  3. Allow this to marinate for at least 12 hours or overnight.
  4. After the item has soaked, remove it from the water and pry at the edge of the patch with a spoon, credit card, or blunt butter knife. Continue if it starts to flake away even a little. With gentle but hard prying, you should be able to remove the emblem completely.
  5. Once the emblem has been removed, you may need to use another procedure to remove any leftover adhesives from the cloth.

7. Glue Remover

Goo Gone Adhesive Remover - 8 Ounce - Surface Safe Adhesive Remover Safely Removes Stickers Labels Decals Residue Tape Chewing Gum Grease Tar

A commercial adhesive remover is also useful for removing tough patches from clothing or bags. The disadvantage is that you’ll need to purchase a commercial product like Goo Gone.

The solution can also be used to remove any remaining adhesive from the fabric after the badge is removed, which is a bonus!

Goo Gone, Elmer’s Sticky Out, Uni Solve Wipes, 3M Adhesive Cleaner, and a variety of other commercial adhesive removers are all popular commercial adhesive removers.

Simply follow the on-package directions to utilize the product. Some products, for example, may require you to wait a few minutes before using them, while others may work right away.

What is the Easiest Way to Remove an Iron-On Patch?

The iron method, which involves warming the glue until it gets tacky and allowing you to easily pull off the old patch, is the quickest and easiest way to remove an iron-on patch.

However, ironing some bulky garments or objects may be difficult. You can try using a hairdryer to gain better access in these situations.

When it comes to removing a badge, the fastest method is to use heat. However, this method frequently results in a sticky residue on the fabric’s surface. You’ll also need a glue remover like acetone or a professional product like Goo Gone to get rid of it.

Can You Remove Iron-On Vinyl?


How to get vinyl off a shirt

Iron-on vinyl is more difficult to remove than iron-on patches, but it can be done with the use of an iron, a knife, and tweezers.

  1. To begin, set your iron to the hottest setting. Instead, if you have a heat press, utilize it! Because whoever put the vinyl on originally had to use heat to get it there, you shouldn’t have to worry about ruining the fabric!
  2. Set up the clothing or object so that you can press the iron on the vinyl’s reverse side. The cloth, not the vinyl, should be ironed.
  3. For ten to twenty seconds, press the iron to the material behind the vinyl.
  4. Remove the iron quickly and flip the cloth over so you can begin prying at the vinyl’s edge with your knife right away. It may come off in flakes at first, but after you get started, chunks of vinyl should come off!
  5. If nothing happens, you’ll have to reheat the fabric’s backside and then pry at the edges.

How Do You Get Patch Adhesive Off Clothes?

Several methods exist for removing patch adhesive off clothing, including utilizing a professional glue remover, acetone, or your freezer.

Instructions will be included with commercial adhesive removers. These will tell you how to apply the product, how long to let it set, and whether or not to wash the item afterward to eliminate the remover!

If the adhesive remover you’ve chosen isn’t quite powerful enough, clean the old glue with an old toothbrush. Then, after rinsing everything off, apply laundry detergent to the sticky region before washing it in cold water.

You can also use nail polish remover, which contains acetone, as a cheaper alternative. In most circumstances, soaking a cotton ball in nail polish remover and swiping it over the dried adhesive several times to remove the old glue will suffice.

Finally, cool the old adhesive for a couple of hours using the freezer method. Then scrape away the residual adhesive with a blunt butter knife!

Stronger solutions, such as paint thinner, may dissolve the badge adhesive as well, but the paint thinner will almost surely damage the garment or bag’s fabric.

Tips for Removing Patches from Special Clothing

Check out these ideas for removing a patch off special apparel now that you know the seven easiest ways to remove an iron-on badge!


In some circumstances, dry-cleaning a uniform is the simplest approach to remove insignia without damaging them. Old badges will most likely fall off as a result of the chemicals used in this process.

If you go this route, make sure you tell the dry cleaner you want the iron-on patches removed!

On the inside of the badge and the cloth inside the uniform, you can use a spray adhesive remover like Badge Magic. Allow fifteen minutes to pass before attempting to remove the patch.


It’s usually not necessary to take any additional steps to remove an iron-on patch off a shirt. You can use the iron approach as long as you can safely apply heat to the fabric! This allows you to quickly reheat the glue before removing the patch.

If your shirt is composed of a more fragile material, avoid using high heat and harsh chemicals. In this instance, the freezer or warm water procedures should be used. Aside from completing a spot test with an iron on a concealed seam of the shirt, you can check the manufacturer’s label on the inside to see if it can tolerate the heat. If you shouldn’t use heat, this label will normally show an image of iron with an X over it.


Most of the time, you can safely use an iron or a glue remover on a jacket. Khaki or denim jackets, in particular, should hold up well to any of the removal methods in this article. On the other hand, if you have a sportswear or acrylic jacket, you may need to try gentle methods that will not damage the synthetic material.

If you have a badge on a thick, puffy coat, you should probably not try the heat method. Instead, try the warm water soak method, which should not melt the fabric!


Many vintage leather jackets come with embroidered patches such as antique motorbike patches, band logos, or other embroidered patches! This is a wonderful ornamental element if you still like all of the patches, but if you want to remove them, you’ll have to be very careful.

Leather should not be exposed to water or extreme heat. This means no ironing, hairdrying, or soaking in warm water! Some chemicals may also cause leather to respond negatively.

You can use the freezing approach to remove a patch from leather, or you can spot-test a commercial solution like Goo on a hidden location to ensure it won’t harm the leather. Then use it to remove the emblem from the leather by gently dissolving the adhesive holding it in place!

Having said that, most iron-on patches don’t stick to leather very well to begin with. As a result, you’ll see patches sewed onto leather rather than fastened with heat-activated glue more frequently.


It’s usually simple to remove iron-on patches from denim. Because denim is made of cotton, it can be safely wet, heated, or treated with a variety of professional adhesive removers.

However, because denim fades quickly, you may notice visible patch-shaped lumps on your denim after removing the badges. There isn’t much you can do about it except cover the places with new patches!


Heat from an iron or a hairdryer can be used to remove iron-on patches from most types of fabric. Another simple technique to get a piece of fabric is to dissolve the previous adhesive with acetone-based nail polish remover or a professional glue remover like Goo Gone. You can either use a warm water soak or freeze the clothing and then snap the badge off if you don’t want to use heat or chemicals.

You may need to work cautiously if your patch is affixed to leather or other delicate material. Try spot-testing a commercial glue remover on a leather patch before using it to release the badge. If you’re working with more delicate textiles, try soaking them in warm water overnight to see if it loosens the patch.

Leave a Reply

Your email address will not be published.